TS EN/DIN Tiùb stàilinn uisgeachaidh mionaideach dubh fosphated air a tharraing gu fuar
Mion-fhiosrachadh toraidh
Tha an tiùb stàilinn uisgeach fosfat dubh air a thoirt a-mach a rèir DIN 2391-C no En10305-4.Tha pìoban stàilinn uisgeach fosfat dubh air an dèanamh de phìoban stàilinn soilleir fuar mar an t-substrate.Agus tha ballachan a-staigh agus a-muigh na pìoba air an fosadh le fuasgladh phosphating gus film dìon dubh fosfatachaidh a chruthachadh.Gabh a-steach ola a tha an aghaidh meirge tro na micropores anns an fhilm phosphating airson làimhseachadh casg meirge, agus còmhdaich an dà cheann airson làimhseachadh casg duslach.Is e prìomh fheartan pìoban stàilinn fosfatadh dubh uisgeach dath èideadh, cunbhalachd àrd, agus deagh sheasamh an aghaidh meirge.
Bithear a’ cleachdadh phìoban stàilinn uisgeachaidh fosphated gu farsaing ann an siostaman uisgeachaidh, innealan togail agus carbadan togail.
Sònrachadh
| Inbhe | DIN2391 DIN1630 EN10305 DIN2445 JIS G3445 SAE J524 |
| Ìre | ST35/E235 ST37.4 ST45/E255 ST52/E355 |
| Suidheachadh lìbhrigidh | NBK(+N) BK(+C) GBK(+A) BKW(+LC) BKS(+SR) |
| Meud | OD: 4 gu 219mm Tighead 0.5-35mm, Fad: 3m,5.8,6 no a rèir riatanasan |
| Crìochnaich | Uachdar galvanized (Sliver / Buidhe / Dathach) Còmhdach sinc de 8-12um |
| Iarrtas | Siostam Hydraulic;Càr/bus;carbad togail |
| Ùine lìbhrigidh | A.3 làithean ma tha seo math tha stoc bathair. B. Mu 30 latha a rèir meud |
| Tube STEEL PRECSION HYDRAULIC ANN AN stoc | ||||||||||
| OD | Tighead(mm) | |||||||||
| mm |
| |||||||||
| 4 | 4*1 |
|
|
|
|
|
|
|
|
|
| 6 | 6*1 | 6*1.5 | 6*2 |
|
|
|
|
|
|
|
| 8 | 8*1 | 8*1.5 | 8*2 |
|
|
|
|
|
|
|
| 10 | 10*1 | 10*1.5 | 10*2 | 10*2.5 |
|
|
|
|
|
|
| 12 | 12*1 | 12*1.5 | 12*2 | 12*2.5 | 12*3 |
|
|
|
|
|
| 14 | 14*1 | 14*1.5 | 14*2 | 14*2.5 | 14*3 |
|
|
|
|
|
| 15 | 15*1 | 15*1.5 | 15*2 | 15*2.5 | 15*3 | 15*3.5 |
|
|
|
|
| 16 | 16*1 | 16*1.5 | 16*2 | 16*2.5 | 16*3 | 16*3.5 | 16*4 | 16*4.5 |
|
|
| 18 | 18*1 | 18*1.5 | 18*2 | 18*2.5 | 18*3 | 18*3.5 | 18*4 | 18*4.5 |
|
|
| 20 | 20*1 | 20*1.5 | 20*2 | 20*2.5 | 20*3 | 20*3.5 | 20*4 | 20*4.5 | 20*5 |
|
| 22 | 22*1 | 22*1.5 | 22*2 | 22*2.5 | 22*3 | 22*3.5 | 22*4 | 22*4.5 | 22*5 |
|
| 25 | 25*1 | 25*1.5 | 25*2 | 25*2.5 | 25*3 | 25*3.5 | 25*4 | 25*4.5 | 25*5 |
|
| 28 | 28*1 | 28*1.5 | 28*2 | 28*2.5 | 28*3 | 28*3.5 | 28*4 | 28*4.5 | 28*5 |
|
| 30 | 30*1 | 30*1.5 | 30*2 | 30*2.5 | 30*3 | 30*3.5 | 30*4 | 30*4.5 | 30*5 | 30*6 |
| 32 |
| 32*1.5 | 32*2 | 32*2.5 | 32*3 | 32*3.5 | 32*4 | 32*4.5 | 32*5 | 32*6 |
| 34 |
| 34*1.5 | 34*2 | 34*2.5 | 34*3 | 34*3.5 | 34*4 | 34*4.5 | 34*5 | 34*6 |
| 35 |
| 35*1.5 | 35*2 | 35*2.5 | 35*3 | 35*3.5 | 35*4 | 35*4.5 | 35*5 | 35*6 |
| 38 |
|
| 38*2 | 38*2.5 | 38*3 | 38*3.5 | 38*4 | 38*4.5 | 38*5 | 38*6 |
| 40 |
|
| 40*2 | 40*2.5 | 40*3 | 40*3.5 | 40*4 | 40*4.5 | 40*5 | 40*6 |
| 42 |
|
| 42*2 | 42*2.5 | 42*3 | 42*3.5 | 42*4 | 42*4.5 | 42*5 | 42*6 |
| 45 |
|
| 45*2 | 45*2.5 | 45*3 | 45*3.5 | 45*4 | 45*4.5 | 45*5 | 45*6 |
| 46 |
|
| 46*2 | 46*2.5 | 46*3 | 46*3.5 | 46*4 | 46*4.5 | 46*5 | 46*6 |
| 48 |
|
| 48*2 | 48*2.5 | 48*3 | 48*3.5 | 48*4 | 48*4.5 | 48*5 | 48*6 |
| 50 |
|
| 50*2 | 50*2.5 | 50*3 | 50*3.5 | 50*4 | 50*4.5 | 50*5 | 50*6 |
| 54 |
|
|
| 54*2.5 | 54*3 | 54*3.5 | 54*4 | 54*4.5 | 54*5 | 54*6 |
| 60 |
|
|
| 60*2.5 | 60*3 | 60*3.5 | 60*4 | 60*4.5 | 60*5 | 60*6 |
| 65 |
|
|
|
| 65*3 | 65*3.5 | 65*4 | 65*4.5 | 65*5 | 65*6 |
| 75 |
|
|
|
|
| 75*3.5 | 75*4 | 75*4.5 | 75*5 | 75*6 |
| 76 |
|
|
|
|
|
| 76*4 | 76*4.5 | 76*5 | 76*6 |
| 89 |
|
|
|
|
|
|
|
|
| 89*6 |
| Nota: Dh'fhaodadh sinn meudan eile a thoirt gu buil mar na riatanasan agad.Làimhseachadh uachdar: Bright, Galvanized, Phosphated etc. | ||||||||||
Co-dhèanamh ceimigeach
| Ìre stàilinn | C | Si | Mn | P | S | Al | |
| Ainm | Chan eil. | max | max | max | max | max | max |
| E215 | 1.0212 | 0.1 | 0.05 | 0.7 | 0.025 | 0.015 | 0.025 |
| E235 | 1.0308 | 0.17 | 0.35 | 1.2 | 0.025 | 0.015 | - |
| E355 | 1.058 | 0.22 | 0.55 | 1.6 | 0.025 | 0.015 | - |
| ST35 | 1.0308 | 0.17 | 0.35 | 0.4 (mion) | 0.025 | 0.025 | - |
| ST45 | 1.0408 | 0.21 | 0.35 | 0.4 (mion) | 0.025 | 0.025 | - |
| ST52 | 1.058 | 0.22 | 0.55 | 1.6 | 0.025 | 0.025 | - |
Feartan meacanaigeach
| Ìre stàilinn | Neart toraidh (Mpa) | Neart tensile (Mpa) | Leudachadh (%) | |
| Ainm | Chan eil. | ReH (mion) | Rm(mion) | A(mion) |
| E215 | 1.0212 | 215 | Bho 290 gu 430 | 30 |
| E235 | 1.0308 | 235 | Bho 340 gu 480 | 25 |
| E355 | 1.058 | 355 | Bho 490 gu 630 | 22 |
| ST35 | 1.0308 | 235 | Bho 340 gu 480 | 25 |
| ST45 | 1.0408 | 255 | Bho 440 gu 570 | 21 |
| ST52 | 1.058 | 355 | Bho 490 gu 630 | 22 |
Fulangas
| OD | Fulangas ceadaichte | Fulangas sònraichte | ||
|
| GB/T3639 | DIN2391 | OD | WT |
| 4mm-20mm | ±0.10mm | ±0.08mm | ±0.05mm | ±0.05mm |
| 20mm-30mm | ±0.10mm | ±0.08mm | ±0.08mm | ±0.08mm |
| 31mm-40mm | ±0.15mm | ±0.15mm | ±0.10mm | ±0.08mm |
| 41mm-60mm | ±0.20mm | ±0.20mm | ±0.15mm | ±0.15mm |
| 61mm-80mm | ±0.30mm | ±0.30mm | ±0.20mm | ±0.20mm |
| 81mm-120mm | ±0.45mm | ±0.45mm | ±0.30mm | ±0.30mm |
Suidheachadh lìbhrigidh
| Ainmeachadh | samhladh | Tuairisgeul |
| Crìochnaichte fuar (cruaidh) | BK(+C) | Cha bhith pìoban a’ faighinn làimhseachadh teas às deidh an fuachd mu dheireadh a chruthachadh agus, mar sin, tha iad gu math àrd an aghaidh deformachadh |
| Crìochnaichte fuar (bog) | BKW | Tha an làimhseachadh teas mu dheireadh air a leantainn le dealbh fuar le beagan deformachadh.Tha tuilleadh giollachd iomchaidh a’ ceadachadh ìre sònraichte de fhuarachadh (me lùbadh, leudachadh) |
| (+LC) | ||
| Crìochnaichte fuar agus faochadh cuideam | BKS(+SR) | Tha làimhseachadh teas air a chuir an sàs às deidh a ’phròiseas cruthachadh fuachd mu dheireadh.Le ùmhlachd do chumhachan giullachd iomchaidh, tha an àrdachadh anns na cuideaman a tha air fhàgail a ’comasachadh an dà chuid cruthachadh agus innealachadh gu ìre. |
| Annealed | GBK(+A) | Tha am pròiseas cruthachaidh fuachd mu dheireadh air a leantainn le bhith a’ annealing ann an àile fo smachd. |
| Normalaichte | NBK(+N) | Tha am pròiseas cruthachaidh fuar mu dheireadh air a leantainn le bhith a’ cur anail os cionn na h-ìre cruth-atharrachaidh àrd ann an àile fo smachd. |
Dearbhadh Càileachd
1.Strict a rèir DIN2391 / EN10305 no inbhean eile.
2. Sampall: Tha sampall an-asgaidh airson deuchainn.
3. Deuchainnean: Deuchainn spraeadh salainn / Deuchainn tensile / Eddy gnàthach / Deuchainn co-dhèanamh ceimigeach a rèir iarrtas luchd-ceannach
4.Certificate: IATF16949, ISO9001, SGS etc.
5.EN 10204 3.1 Teisteanas
Iarrtas
